Skip to content

Helpful Truck Stop Parking Lot Design Planning Tips

Helpful Truck Stop Parking Lot Design Planning Tips

Truck stops receive a lot of stress and force over their lifetime. Multi-ton vehicles park and drive on them all day long, not to mention that they experience temperature fluctuations, landscaping, and drainage concerns. You need an excellent plan to provide drivers with a well-working truck stop. The following are helpful truck stop parking lot design planning tips to ensure yours will work for years to come.

Asphalt or Concrete

The material you create your truck stop parking lot with will impact the initial cost of the project. Concrete is more substantial than asphalt but also comes with its set of challenges. Asphalt becomes sticky, hot, and soft during the sweltering summer heat. Concrete is more expensive and doesn’t hold up as well to heavy loads. Concrete will require costly maintenance due to soil movement and water damage from drastic temperature changes, only to ensure the lot is usable.

Adequate Space, Flow, and Signage

Creating a good flow and giving truck drivers the space to park is essential when planning your truck stop parking lot. You need to provide adequate space for two-way parking traffic to access both sides.

Helpful, correct, and lawful signage is a must. It provides safety for people using the lot and also keeps the flow moving correctly. Some signs you need include the following:

  • Pedestrian crossings
  • Handicapped and van-accessible spaces
  • Stop and yield signs
  • Speed limit markers

Correct Markings

You’ll need safety markings in your parking lot along with correct striping for your parking spaces. Markings show drivers where to locate the accessible parking stalls and which way to drive in the lot. They also symbolize to pedestrians where it’s safe to walk and cross. These markings must be visible and not be faded. Precise Property Maintenance in Texas has parking lot striping services you can use.

Safety and Security

The last helpful truck stop parking design tip is not to let the security and safety of drivers fall to the wayside. You’ll need adequate lighting for night, and if lights go out, get the bulbs changed straightaway. Additionally, since you’ll also need to prevent standing water from occurring on your lot, the slope should have a slope of at least two percent.