What Is the Average Length of a Parking Lot Stripe?

Parking lot stripping refers to the white or yellow lines in a parking lot. They’re two sets of parallel lines that mark the length of an aisle to facilitate vehicle parking. Having clean, visible spaces creates safe and orderly parking for visitors to your property. It’s also crucial to provide accessible parking spaces to guarantee ADA compliance.

Without clear parking lot stripes, you’ll encounter off-center parking that can affect the flow of your property. Poor striping can also make accessible spots challenging to find. Fortunately, parking lot stripping services can improve your lot!

As you read on, you’ll learn more about the aspects of parking lot stripping.

The average length of a parking lot stripe is around 20 feet, which accommodates different types of vehicles. However, the dimensions vary for one-way and two-way aisles. The standard parking space scale is between 8.5 to 9 feet wide by 18 to 20 feet long. Parking lot lanes have a gap between rows varying from 14 to 24 feet.

One-way and two-way traffic affects the dimensions of parking lot stripping. Generally, two-way lanes need wider dimensions to enable safe passage of vehicles in opposite directions. Therefore, two-way aisles are no thinner than 20 feet. One-way lanes have more flexibility to be narrower, but they still require minimum dimensions to accommodate vehicles. For instance, most one-way stripes are four inches wide.

You must also consider angles when working with one-way and two-way lanes. You’ll need to factor in whether the lines are straight or angled as you calculate how many spaces to mark.

The angle where parking spaces meet the curb is a major factor in determining the width of the aisle between rows. Most parking lot angles are either 30 degrees, 45 degrees, or 60 degrees. The wider the angle, the wider the aisle should be—vehicles will require more space to efficiently navigate in and out of a spot. One-way aisles with spaces at 90-degree angles have the same width as two-way lanes.

Please note that accessible parking space dimensions vary depending on your local regulations. You should also consider factors such as parking lot traffic, angles in relation to the curb, and accessibility features (vehicles with ramps). Accessible parking spaces must be at least 14 feet wide to accommodate wheelchairs, walkers, and other equipment.

Depending on the size of the van, the length of the space may also need to increase to properly accommodate visitors. The van-accessible spot should be 11 feet wide and run the full length of the parking stall.

At Precise Property Maintenance, we can help you improve your parking lot. Contact us today to learn more about our professional parking lot stripping. We look forward to hearing from you!